The HME DX210 is a newly-designed, two-channel intercom system that has advanced the capabilities of the legendary DX200. The DX210’s wired intercom interface is now compatible with Clear-Com’s 2-wire systems, and provides two separate 2-wire and 4-wire interconnections. The powerful 1RU base station supports up to 16 full-duplex and 44 half-duplex beltpacks and/or wireless headsets by linking four base stations. The DX210 is paired with the rugged BP210 beltpack and All-in-One WH210 Wireless Headset COMMUNICATOR®s, which have two intercom buttons (IC1/IC2) with ISO. The system is also backward compatible with the DX200 COMMUNICATOR models such as BP200, WH200 and WS200 (Wireless Speaker Station).

One of the features in the HME DX210 is a digital auto-nulling circuit, which allows users to eliminate the return audio of the wired 2-wire intercom automatically. The system offers 2-wire circuit protection to prevent feedback from un-terminated 2-wire channels. The DX210 also has an assignable AUX input for program. The DX210 allows for relay (GPO) actuation with ISO function from either base station or any one of the appropriately configured COMMUNICATORs.

The DX210, as with all DX Series systems, features Spectrum-Friendly™ Technology to avoid frequency conflicts and Digital Frequency-Hopping Spread Spectrum (FHSS) technology for interference-free communication.

Tempest900 is the new wireless intercom system that operates in the 900 MHz frequency band, available in 2- and 4-channel versions and comes

fully-loaded with the same set of features, functions and operations as the Tempest2400; including the ability to operate in Normal, Split and Shared Modes.

The difference is that Tempest900 may provide improved coverage in areas where more structural penetration is required and in large enclosed areas where multipath interference would otherwise be a factor.

A single Tempest900 in Normal Mode can support between one and five full duplex wireless users. But, by using a BaseStation in Split or Shared Mode, it can support an unlimited number of users who need to monitor the conversation and can share talk capacity.

A total of five Tempest900 BaseStations can be co-located and connected together via their Partyline or 4-wire intercom connections offering a maximum of 25 Tempest full duplex wireless BeltStations operating in close proximity while maintaining excellent system performance.

Tempest900 is available in the United States and Canada.

The CQ 1520 is a rack mounted three step power sequencer with a twenty amp capacity.

Because it contains all necessary timing and communications circuitry, no master control device is needed. This makes the CQ Series expandable and adaptable to a broad range of applications.

CQ Series models use RJ45 cable (similar to CAT 5) to communicate and coordinate the turn on and turn off process. No programming is needed. The CQ Series design is "plug and play" easy to install and operate.

List price is just $426

Compare to the Furman PS-Pro and the Middle Atlantic PDS-620R.

The microphone unit CMic is the delegates' frontend for communication within the DIGIMIC discussion system.
The design of the new DIGIMIC presents the essential function and controls in a clear and generous arrangement on a clean surface. It offers one microphone button for push-to-talk and request-tospeak function. The two integrated loudspeakers provide even decentralized voice amplification to increase the speech intelligibility especially for conference areas without a PA system.
In addition each CMic is equipped with an amplified headphone socket and corresponding volume control.  CMic works with all components of the system DIGIMIC. As a wired component the CMic has a firmly mounted cable (2.50 m) with a lockable plug.

DIGIMIC – the most reliable conference system for over three decades now takes you beyond digital. With DIGIMIC you no longer need to decide between wired or wireless. You can have either and/or both!

You determine what solution is most appropriate for your application. To convert a wired DIGIMIC to wireless, simply remove the cable, and add a DDoc with DSpark. It is as simple as that.

Simple, versatile, DIGIMIC!

DIGIMIC is a plug and play conference microphone system that self-adjusts to on-site frequency conditions. All microphones are RF/GSM resistant.

Selectable voice activation will be available starting in Fall 2010.

Ashly Audio’s New KLR-series power amplifiers deliver 2-Ohm rated output at a price that allows Systems Integrators to profitably value engineer their sound systems. KLR amplifiers deliver the best signal/noise rating in the category. All KLR-series amplifiers have Ashly’s industry leading 5-year warranty.

Ashly Audio's promise to "Simplify Integration" continues with pêma (Protea Equipped Media Amplifier), a unique powered processor. Pêma sets a new industry benchmark for value-engineered zone sound systems. By seamlessly merging Ashly's powerful, open-architecture DSP functionality with Ashly's renowned amplifier performance inside a two-rack space unit, pêma lowers overall system cost, occupies less space, improves energy efficiency, and both speeds and simplifies system installation and programming. Four and eight amplifier channel versions are available at both 125 and 250 Watts per channel. Full 96kHz performance is available on 32-bit SHARC processors for utterly transparent audio. more info

Intelix is extremely pleased to announce the release of our DIGI-SCAL-11X2 switcher/scaler/format converter. The Intelix DIGI-SCAL-11X2 provides switching between eleven different audio-visual sources, upscaling them to 720p or 1080p, and converting them to HDMI. It is ideal for integrating legacy, non-HD equipment into a distributed high-definition audio-visual system--or, as we like to say, it "makes your old skool equipment look good and your new school technology state-of-the-art."

- switch eleven sources to two HDMI outputs

- upscale sources to 1080p

- control via the front panel, IR, RS232, or with an included wireless remote

- convert digital audio to analog stereo audio

- made in the USA!

The specially developed Zino establishes a new level of sound quality for portable sound devices.

• NE4250 (4-Channel) & NE8250 (8-Channel)
• NE4250PE & NE8250PE feature on-board Protea™ DSP Suite
• Custom configured at Ashly’s Webster, New York Factory with your choice of Line Level, CobraNet®, EtherSound®, AES/EBU or 4 x Mic Pre Inputs.
• The Low-Z, 70V, 25V and 100V amplifiers are separate & dedicated models.

Features